Home › How to measure your pool
How to measure your pool for a made-to-measure cover
To order a made-to-measure pool cover, measure the length and width of the water (inner wall to inner wall) for a solar cover, stone to stone along the outer edge of the coping for a winter cover, and the exact pool opening for a slatted cover; then note where the steps are and what shape the pool is.
It is the figure that is easiest to get wrong, and the cover is made to your measurements, so it is worth measuring twice. If you would rather not, you can ask us to come and measure: WS Cover's measuring visit is optional. Before you measure, decide which pool cover to choose, because it changes where you measure.
| Cover | Where you measure | Why |
|---|---|---|
| Solar cover | The water opening, inner wall to inner wall (at the waterline). Do not measure stone to stone. | It floats on the water and is made to the size of the opening. The coping overhangs the water, so measured stone to stone the cover would come up short. |
| Winter cover | Stone to stone, along the outer edge of the coping, from one side to the opposite one. | It does not float: it is anchored to the stone. We add 32 cm on each side to your figure (25 cm of overlap and 7 cm of hem). |
| Slatted cover | The pool opening, exactly. Tell us if the coping overhangs the pool anywhere. | Slats are rigid and carry no margin. If the coping overhangs, it always has to be cut back; that cut is not included in the price and we quote it before doing it. |


How to measure your pool, step by step
- Choose the cover. It decides where you measure (see the table above).
- Measure the length and the width in a straight line, in metres (for example 8.00 × 4.00). Do it twice and write both readings down.
- Look at the corners. Square or rounded? The configurator asks (for slatted covers, it also asks for the corner radius).
- Locate the steps: which side they are on, whether they are Roman or straight, and how big they are (below).
- Take a photo of the whole pool and another of the steps. If anything looks odd, send them to us on WhatsApp.
- Enter the measurements in the configurator (solar cover, winter cover or slatted cover): the price is calculated straight away, and we go over the measurements, the shape and the price with you before anything is made.
Pool shapes: what to choose in the configurator
For the solar cover and the winter cover you will find rectangular, round, oval, octagonal, L-shaped, with Roman or straight steps (at the end, on the side or centred), kidney and free form. Left and right are given looking at your pool from where the roller goes; if in doubt, follow the drawing, which is your pool seen from above. If yours is irregular or you are not sure, send us your approximate measurements and photos and we prepare a made-to-measure assessment.
Roman steps, straight steps and handrail ladders
- Roman steps: they are a half circle, so they usually measure roughly half of their base (a 3.00 m base, about 1.50 m deep). That is not always so; if your figure is much smaller, measure again.
- Straight or square steps: the configurator asks for the side they are on and their size, with a drawing.
- Metal handrail ladder (winter cover): if you can, take it off for the winter; it is usually just two screws, and the cover comes out cleaner, with no cut-out. If it stays, measure from post centre to post centre, in metres: the three figures must add up to the length of that side, and a technician checks the measurements before manufacturing.
Overhanging coping, raised pools and infinity pools
If the coping overhangs the water, measure the water for the solar cover and the stone for the winter cover; for slatted covers, any overhanging stone has to be cut back. If your pool is an infinity (overflow) pool, tick it in the slatted-cover configurator. In any case, if your pool is raised, an infinity pool or has an unusual edge, send us a photo on WhatsApp before you order.
The mistakes we see most often
- Measuring stone to stone for the solar cover: it comes up short.
- Mixing the criteria: each cover is measured where the table says.
- Mixing up left and right: they are counted looking at the pool from where the roller goes.
- Not mentioning the steps, or not measuring them: they change how the cover is cut.
Would you rather we measured?
WS Cover's measuring visit is optional. In the configurator you choose to have us come and measure and fit it (“WS Cover measuring and installation”) and we add it to your quote: you see the updated amount before you send it, and we take the measurements ourselves before manufacturing, so you are no longer responsible for them. We measure and fit in our service area (Almería, Murcia and Granada; for example Mojácar, Vera and the Almería coast). Further away, measure with this guide or send us photos on WhatsApp. If you ask us to ship the cover, it arrives for you or your installer to fit: how shipping works.
Already have your measurements and want the price? See how much a pool cover costs by size and, if your pool is 8 × 4 m, the 8x4 pool cover price. Lectores en español: cómo medir tu piscina para una cubierta a medida.
Measuring your pool: common questions
Do I measure the pool from stone to stone or at the water?
It depends on the cover. The solar cover floats on the water, so you measure the water opening, inner wall to inner wall: if you measure stone to stone the cover will come up short, because the coping overhangs the water. The winter cover is measured stone to stone, along the outer edge of the coping. Slatted covers measure exactly what the pool opening measures.
How much extra do you add to the winter cover?
We make the cover 32 cm larger on each side than your stone-to-stone measurement: 25 cm of overlap onto the stone, which is what holds it down, and 7 cm of hem. The configurator does this for you; you only give the stone-to-stone size.
How do I measure Roman steps?
Roman steps are a half circle, so they usually measure roughly half of their base: with a 3.00 m base, about 1.50 m deep. That is not always the case, but if your figure is much smaller, measure again. The configurator asks which side the steps are on and how big they are, with a drawing.
What if my pool has an irregular shape?
Choose “free form” or “other / not sure” in the configurator and send us your approximate measurements and photos: we prepare a made-to-measure assessment of your pool.
Can I measure from a photo, or do you need to visit?
You enter the measurements in the configurator, or we take them ourselves. A photo does not replace measurements, but it helps with any doubts: send it on WhatsApp to +34 667 48 03 63 and we will point you in the right direction.
What happens if I get a measurement wrong?
Before manufacturing we go over the measurements, the shape and the price with you, and nothing goes into production yet. Once it is in production, because it is a made-to-measure product, it cannot be cancelled for errors in the measurements supplied; so it pays to measure twice or ask for our measuring visit.
I have my measurements: work out my cover
Made-to-measure solar cover Made-to-measure winter cover Questions: WhatsApp 667 48 03 63
